inCODE Application for 64-Bit Versions Windows

One of the advantages of our ISIS Power system is the ability to load new configurations to it in the field.  Our inCODE programmer has proven to be a reliable tool to update ISIS.  Unfortunately, there have been problems with running the inCODE software on computers running 64-bit versions of Windows.  The original application was designed for 32-bit versions of Windows and Microsoft significantly increased the hurdles to get USB drivers approved for 64-bit. 

We have just finished testing and evaluating the updates to the inCODE software that will operate on 64-bit versions of Windows.  This includes Windows 8.1 too.  Here are the instructions to load and run the new application. 

1. Temporarily disable your virus scanning software. 
2. Go to http://www.embedinc.com/picprg/sw.htm and click on the install_picprog executable.   
3. Run the install_picprg executable.
4. When the installation is done, plug the programmer into the computer.  Let it find the drivers as necessary. 
5. Reboot the computer. 
6. Go to Programs/Embed Inc/Program PIC. 
7. Save your hex file to your desk top. 
8. Plug the programmer header into the ISIS cell to be updated.  Make sure that the file name matches the serial number of the cell. 
9. Browse for the file and hit PROGRAM on the GUI.

 The new user interface for inCODE looks like this:

If you have questions, please contact our technical department at (847) 232-1991 or email us at sales@isispower.com.