Connecting the Electric Choke

Hi guys,

I just got done connecting the Electric Choke. Essentially all that was required was to connect the ignition to the positive terminal of the choke. Below is a photo of the splice off the ingition wire.


Next is the connection to the choke terminal. I used 14 AWG automotive wire, the same that is used for all of our PowerCell output harnesses. This can carry up to 25A with ease, which is plenty for a choke application in this vehicle.

Lastly, we adjusted the choke position to fully open after a few minutes of the engine running.

For more photos of connecting the choke and of all the work done on the truck so far, please visit our facebook page, ISIS Power.

Thanks,
Max