Updated ISIS Manual for inTOUCH NET

We just released a new version of the inTOUCH NET manual.  This has been revised to include all of the new functions.    You can download the new manual by clicking on this link. 

If you have any questions regarding the functions of our new inTOUCH NET, give our team a call at (847) 232-1991. 

Purevision TT Camaro Wins Big at SEMA 2013

 

 

Steve Strope and his team from Purevision Designs unveiled their 1972 TT Camaro at the 2013 SEMA show.  You may have seen this piece of art in the HRE booth. 

This is a very cool machine... tons of carbon fiber, elegant paint, great wheels and a twin-turbo engine putting out more than 1,300 horsepower. 

Here's a quick video of Steve hitting the highlights of the car. 




This car is wired with a full ISIS Power system.  They're using a 3-Cell Kit with inLINK and inMOTION.  Additionally, they have our inTOUCH MAX screen in the dash to control all of the vehicle functions including the Vintage Air through our inVIRONMENT interface. 

When you see the car in person, you'll understand why everyone loves it.  Purevision's TT Camaro won the coveted 2013 SEMA Design Award for Best GM Vehicle.

They also won the Mother's Choice Award for Excellence in Automotive Design. 

Congratulations to Steve and the entire team at Purevision Designs for receiving these accolades.  The entire ISIS Power team is proud to be a part of the TT Camaro. 

Great ICON 4X4 Coverage on FOX

One of our favorite vehicles wired with our ISIS Power system at the 2013 SEMA show was the new TR from ICON 4X4.  It was highlighted in the new vehicle technology showcase at the show. 

There are lot of things that bring new technology to ICON's new TR.  It is using a new Art Morrison Chassis, the body and paint are using the newest technologies, the suspension is state of the art and it is motivated using an LS engine.  Most significantly is what you don't see in the truck.  The ICON team wired the truck using our ISIS Power 3-Cell Kit, inLINK, inMOTION, inRESERVE and inTOUCH NET.  They get the simplicity of our multiplexed architecture with all of the electrical technologies found in all new OEM vehicles.  Our new inTOUCH NET lets them control the entire truck from any smart device or the Kenwood head unit mounted in the dash. 

This link to the ICON website lets you take a virtual tour of the truck to see the ISIS technology available.  You can see this by clicking here. 

Fox News did a great piece on the show and the TR.  The video features Jonathan Ward of ICON 4X4 talking about the truck and what makes it special.   You can see the video by clicking on this link. 

Keep watching out blog for more recap from the 2013 SEMA show. 

BXR Motors at SEMA 2013

SEMA is always a fun time for us.  We get to meet a lot of our customers and see their cars wired with our ISIS Power system. 

Neal Bailey and his team unveiled the BXR Motors Blade XTR at the 2013 SEMA show.  This is a killer, unique super car and it is wired with our ISIS Power products. 

When the time came for Neal and his guys to pick the electrical system for their new super car, they turned to the ISIS Power team to pick the latest & greatest in technology.  They knew that our products would get them the simple & clean installation that they needed for the car plus they knew that we could get them the technology and features that not other system could. 

Check out one of the great videos from their blog to see their path to SEMA. 



You can get all of the details on BXR Motors at their website by visiting www.bxrmotors.com.

Congratulations to Neal and his team for an awesome unveiling.

Check out the ICON 4X4 Thriftmaster at SEMA 2013

 

Check out the ICON4X4 Thriftmaster at the 2013 SEMA Show.  Jonathan Ward and his team at ICON4X4 have created a new truck to augment their offering.  This is a spectacular piece of automotive engineering. 

The truck was chosen to be in the Vehicle Technology Showcase at the 2013 SEMA Show.  It is using the latest technology in engine management, superchargers, transmission control and electrical power management with our ISIS Power system. 

Jonathan and his team wired this truck with our 3-Cell Kit, inMOTION, inLINK, inRESERVE and inTOUCH NET.  They get full control of the vehicle through any smart device and the Kenwood DNN990HD that is mounted in the dash. 

The entire team at ISIS Power is proud to be a part of this project.  Be sure to check this out at the 2013 SEMA Show in Las Vegas.  The truck is located just outside of the Starbucks in the main hall of the Las Vegas Convention Center. 

ISIS Power at SEMA 2013...

The ISIS Power booth is ready to go for SEMA 2013.  We have an awesome 1967 LS1-powered Camaro built by our friends Joe M & Mark M. 

This car is wired with our 3-Cell Kit, inMOTION, inVIRONMENT, inLINK and our new inTOUCH NET system.  Come by booth 24955 to see how inTOUCH NET completely changes the way that you can interface with your car. 

We'll be Tweeting and blogging all week.  Stay tuned for updates from the show and other product announcements. 

Come see Hypersilver at SEMA...

Come check out Hypersilver, built by Marc Christ and the rest of the team at Muscle Mustangs & Fast Fords Magazine.  This car was designed and built to celebrate the 25th anniversary of the magazine. 

This is an awesome car, wired with our ISIS Power system.  They replaced the stock Mustang wiring harness and installed our 3-Cell Kit with inLINK and inMOTION. 

You can see the grand unveiling of the car in the Source Interlink booth at the 2013 SEMA Show in Las Vegas Nevada.  The event will be at 11:30 AM on Tuesday November 5th in booth 22743.  Be sure to stop by. 

More Shameless Coverage...

Maurie & his wife Lynne have put some great miles on their 1967 C10 show truck called "Shameless".  They have been working the show circuit for the past year and have been cleaning up the awards.  You can see tons of past posts on our blog about the trophies that they have won. 

They wired this truck with our 3-Cell Kit, inMOTION, inLINK and inTOUCH MAX touch screen.  As custom as this truck is, there was no stock replacement wiring harness that could do what Maurie had envisioned.  That's where our team at ISIS Power came in. 

Our ISIS Power system let Maurie wire and control Shameless in the way that he wanted.  He got a simple installation plus modern electrical functions that no other wiring harness could get him. 

Jason Mulligan of Street Trucks Magazine just finished a great two-part article talking about the truck and showing off some of its details.  You can see read these two articles at these links. 

Click here for the first part. 

Click here for the second part.

Congratulations again to Maurie & Lynne for more great coverage on their truck. 

If you want to learn more about how ISIS can help you wire your car, truck or custom vehicle, give us a call at (847) 232-1991 or email us at sales@isispower.com.   

V8TV Promo for SEMA 2013...

Folks,

SEMA is looming.  Check out the promo that V8TV posted today talking about what they're going to covering at the show.  They'll be in our booth over the course of the show covering our new inTOUCH NET product.  Check this out. 



Thanks to Kevin & Kelle Oeste for continuing their great coverage of our ISIS Power products. 

ISIS Power at 2013 SEMA Show in Las Vegas

It's that time of year again.  We're boxing up our stuff and heading west to the 2013 SEMA Show in Las Vegas.  Come by the ISIS Power booth to meet the team, play with some products and experience our new inTOUCH NET system. 

We'll be in booth 24955 in the Central Hall, not far from where we were last year. 

The dates of the show are November 5th through the 9th at the Las Vegas Convention Center.  You can get more details on the show from the website at www.semashow.com. 

Keep watching our blog for more announcements for ISIS Power at the 2013 SEMA Show!

SEMA- Mobile Electronics: Vehicle Electrical Systems

Yes, SEMA is rapidly approaching.  If you're going to be attending the event, here is a seminar that we'd strongly recommend. 

Our team here at ISIS Power has known Tony Candela for many years.  He is the author of two bedrock books about automotive wiring and electrical system.  You can see past posts on these books at these links.  Here's more information on his first book.  This link will take you to information on his second. 

As an authority on all things related to automotive aftermarket wiring, Tony will be giving a presentation at the 2013 SEMA show titled "Mobile Electronics: Vehicle Electrical Systems-Building a Solid Foundation to Ensure Peak Performance".  You can get more information on this seminar by visiting SEMA's website at this link. 

Here's more information on his presentation:

"Presenter Tony Candela is one of the most knowledgeable and respected technical experts on the topic of vehicle electrical systems, particularly debunking myths about how components use voltage and current to perform electrical work. Often in muscle cars, hot rods and many newer ‘computer controlled’ charging systems, the lacking element of successfully adding or modifying the vehicle’s electronics is understanding how these items work together in the first place. Tony will help you take the opportunity to optimize charging, drivability and overall vehicle safety using very simple concepts and practices he demonstrates during this exciting session with live demonstrations. "

You can learn more about Tony, his first two books and his up coming book on Carb to EFI at his website by visiting www.candela-sales.com. 

Be sure to check out his seminar at the 2013 SEMA show. 

ISIS Power in Hotrod & Restoration Magazine

The November issue of Hotrod & Restoration magazine features an article on wiring and electrical system.  ISIS Power President, Jay Harris, was interviewed for this article to talk about trends in automotive wiring, new technologies and some new products that we have recently released. 

The article polled other companies that make wiring harnesses and electrical components for the automotive aftermarket.  It covers the market, forecasts, new products, technical support and installation tips. 

You can see the article in the on-line version of the magazine by clicking this link.  It starts on page 48.  Alternately, you can see the article in the printed version of the magazine that should be in your mail boxes this week. 

If you want to learn more about our ISIS Power products and how we can help you get the most out of the electrical system in your car, call us at (847) 232-1991 or email us at sales@isispower.com. 

Vote for ISIS Power

Hey Folks,

We made it to round 2 of Intuit's Small Business Big Game contest.  The winner gets their company featured in a commercial at the Superbowl in February 2014.  You can vote daily for us. 

Help us get our name out to the world.  Vote early, vote often.  You can vote by clicking the button below.

 

Mounting the rear POWERCELL

Check out the next video in Allan's install series showing him wiring his SL-C with our ISIS Power system. 



In this video, he shows mounting the rear POWERCELL.  This is located on the rear fire wall, behind the passenger's head.  You can see how simple and easy wiring this car can be.  All of the wires are pre-terminated and labeled for easy connections. 

The rear POWERCELL in the SL-C kit is powering the ECU, the starter solenoid, the fuel pump, the turn signals, the brake lights and the clutch for the air-conditioning compressor.  There are 4 extra, open outputs on this rear POWERCELL that can be used for other things that you want to add to the rear of the car. 

Allan does a great job of walking you through each wire in the harness.  He is very detailed. 

Check out the rest of his videos on YouTube.  He has created a comprehensive video series showing every step of building the Superlite SL-C. 

If you have any questions related to wiring your car with our ISIS Power system, please give us a call at (847) 232-1991 or email us at sales@isispower.com.  Check out www.isispower.com for more info. 

Front Cells in SL-C Build

Here's the next video in Allan U's install series showing him wiring his Superlite Coupe with the ISIS Power system that comes standard with the car. 

In this installation, he shows where he mounted his MASTERCELL and front POWERCELL.  He also shows you how well the harnesses are labeled and how simple it is to wire this car.  He will also show you how he routed his CAN harness through the car.  Check it out. 



The ISIS Power system that comes standard with the SL-C has all of the electrical functions in the car pre-wired.  This includes all of the lighting, fans, power for the ECU, starter solenoid and horn.  Additionally, we include all of the wiring necessary to control the hydraulic pump to raise and lower the nose of the car plus the controls for the tilt/telescope mechanism for the steering column. 

We'll post more of Allan's videos showing off the ISIS Power system that he installed into his SL-C. 

If you want to learn more about how our ISIS Power products can help you wire your vehicle, contact us at (847) 232-1991 or email us at sales@isispower.com. 

Mega Fuses in the SL-C

Here at ISIS Power, our roots are in automotive circuit protection.  We grew up designing products that protect modules and wiring harnesses from short circuits and other over voltage events that happen in cars.  When you buy one of our ISIS Power kits, you get a complete wiring system that includes all of the fusing that you need to safely and properly wire your car. 

Fundamentally, fuses protect wires.  If a wire in your car gets accidentally shorted to ground, you want the fuse to be the weakest link in the chain.  The fuse should open before the wire overheats and causes other damage. 

One of the most important things that you get with our kits are the primary fuses that protect the power feeds that go to the POWERCELLs.  Depending on your kit you may get a set of Mega fuses and holders or you may get a set of JCASE fuses and holders. 

Check out the next video in Allan U's series showing how he wired his Superlite Cars SL-C using the custom ISIS Power kit that is included with the car.  In this video, he shows off his Mega fuse installation. 



Allan has a ton of other videos that walk through the entire process of building his SL-C, including his ISIS Power install.  Check them out on YouTube of keep watching here for more videos and explanation.

If you want to learn more about our ISIS Power products and how you can wire your car with ISIS, call us at (847) 232-1991 or email us at sales@isispower.com. 

SL-C ISIS Install Videos

Our ISIS Power products have been used to wire tons of different vehicles.  You can find ISIS in restorations, hot-rods, race-cars, Pro-Touring cars, buses, limousines, coaches, utility trucks, promotional trucks, armored vehicles and electric cars.  Our system provides great benefits and features to anything that needs a wiring harness. 

We've been working with the team at Superlite Cars for several years on their Superlite Coupes.  You can learn more about these cars at this link.  We've created a custom ISIS Power kit that is included with every SL-C kit.  This gets you all of the ISIS Power hardware and harnesses to wire the car. 

Allan U, one of our customers, has just finished his SL-C.  He put together a bunch of great videos showing off the process including wiring the car with the ISIS kit.  You can see the step-by-step action of installing all of the ISIS cells and the wiring harnesses in the car. 

In this first video, Allan shows off the hardware that comes with the car. 



You can see Allan's entire video series on You Tube.  You can also catch these videos here on our blog.  Stay tuned.

Is you have any questions about how you can wire your car with our ISIS Power systems and the benefits that you get over a traditional wiring harness, give our guys a call at (847) 232-1991 or email us at sales@isispower.com. 

Revved Automotive Concepts

Here is another stunning example of one of our customers' cars.

Sean Sawyer and his team at Revved Automotive Concepts just finished a 2,200 mile road trip in a 1970 Chevelle that they built for one of their customers. This road trip was the culmination of the most intensive build that they had done as a shop; not only integrating cutting edge technology, but pushing the envelope with interior styling and under hood fabrication. This vehicle truly belongs on the SEMA show floor but it is fully capable for the road.

This owner's first vehicle was a 1970 Chevelle convertible that he regretted parting with many years ago.  When the opportunity to purchase this "fully restored, custom built" version of his beloved vehicle came up for sale online he jumped at the opportunity.  Unfortunately, within a week of receiving the Chevelle, he realized that it wasn't the high dollar resto-mod it had been portrayed as.  The supposedly fresh 454 big block provided lack luster performance, the steering was loose and clunky, the restomod interior was uninspiring, and overall the vehicle didn't feel sorted.  His search for a shop capable of bringing the vehicle up to his standards brought him to the Revved Automotive Concepts website.  After several phone calls discussing the direction of the project the vehicle was shipped to them. 

Sean and his team had their work cut out for them.  They knew they had a ton of mechanical issues to work through but they were in for a surprise when they started digging behind the dash.  Electrically, this car was a basket case.  Here’s a great example of what they found. 

They knew that they wanted the best for the car, so Sean turned to our ISIS Power team to replace the aging wiring harness.  They wired the Chevelle with our 3-Cell Kit, inMOTION, inLINK, inVIRONMENT for the Vintage Air Gen-IV and our inTOUCH MAX touch screen.  inTOUCH MAX becomes the command center for the car.  Most all of the electrical functions are controlled from the screen, including all of the controls for the heating and air-conditioning.  This eliminates all of the clutter of switches on the dash, keeping the look clean.   

Sean put a lot of planning into the locations of the MASTERCELL and POWERCELLs in the car.  This allowed him to dramatically reduce the total amount of wiring in the car.  Here you can see the dash under construction.  You can see the inTOUCH MAX screen and the MASTERCELL behind the glove box area. 

Here you can see the rear POWERCELL, mounted in the trunk.  This is powering the brake lights, turn signals, parking lights, fuel pump and audio in the back of the car.  Since the POWERCELL is located in the trunk, all of the runs of wire are short and easy to manage. 

Here you can see the front POWERCELL, mounted in the front, right corner of the car.  The POWERCELLs are rated for environments up to 125 C so they can easily be installed under the hood. 

Here you can see the finished product of the dash.  With our inTOUCH MAX screen, there is no clutter. 

The finished product is an elegant and clean car.  Sean’s customer has the quality and functionality that he envisioned in his Chevelle. 

You can learn more about this build and see more pictures at Sean's website by clicking here.  You can also contact him directly at ssawyer@revvedac.com. 

If you want to learn more about how our ISIS Intelligent Multiplex System and our ISIS Power products can help you wire and power your car, contact our sales team at (847) 232-1991 or email us at sales@isispower.com. 

Small Business- Big Game

We are all about building a brand.  Since we started the ISIS Power business in 2008, our goal has been to let our customers simplify the way that they wire their vehicles.  Whether you're building a hot-rod, a race car, an armored vehicle or a bus, our ISIS Power products can reduce the size, weight and complexity of the wire harnesses.  At the same time, we add diagnostic and trouble shooting functions to help wire the vehicle faster and quickly solve problems on the road.  Lastly, we give all of our customers functionality that no other system can offer. 

To help push our brand building, we've entered Intuit's Small Business, Big Game contest.  This gives our ISIS Power business a shot at winning a commercial spot at Superbowl XLVII to be aired on February 3rd, 2014.  This would put our business up in front of the world. 

Here's what we need from all of our loyal blog readers... vote for us.  The game is simple.  The company who gets the most votes wins.  You can go to our company page by clicking this link here. 

You can vote once per day for a company.  Visit our company page on the Intuit website daily and vote.  Your help will get us to the Big Game. 

Thank you very much,

The ISIS Power Team. 

Shameless on Cover of StreetTrucks Mag

You may have seen Maurie Hoover's highly customized 1967 C10 at the 2012 SEMA Show in Las Vegas.  You may have also seen it at various shows over the past year.  Now you can catch the details in the September 2013 issue of Street Trucks Magazine.  You can't miss it, it's on the cover. 

Maurie and his team assembled a great look, slammed-to-the-ground 1967 Chevy C10 truck.  Dubbed "Shameless", there is no shame in the quality or workmanship in this project. 

They replaced the original OEM wiring harness and rewired the truck with our ISIS Intelligent Multiplex System, including our 3-Cell Kit, inMOTION, inLINK and our inTOUCH MAX touch screen.  The end result is a clean wiring job with tons of controls from the inTOUCH MAX screen. 

You can read all about the details of this truck in the September 2013 issue of Street Trucks.  You can also catch this on-line at www.streettrucksmag.com. 

If you want to learn more about our ISIS Intelligent Multiplex System and our full suite of ISIS Power products, give us a call at (847) 232-1991 or email us at sales@isispower.com. 

Built to Cruise Coverage in Mustang 5.0

Check out the on-line coverage of Mike Raburn's Built-to-Cruise Mustang. 

This is a great looking Fox Body Mustang wired with our ISIS Power system.  Mike and his crew replaced the original Mustang wiring harness with our ISIS Intelligent Multiplex System to streamline the wiring job and add modern features to this 1989 car. 

They wired the car using our 3-Cell Kit with inLINK.  You can see pictures of the install in the on-line article.  Click here to go to the Mustang 5.0 website. 

Give our guys a call at (847) 232-1991 to learn more about our ISIS Power products. 

PROBLEMS WITH THE ISIS POWER WEBSITE

Hello All,

The company that hosts the ISIS Power website is having problems with their servers.  Presently, people are having problems accessing www.isispower.com.  They are working quickly to get this fixed.  If you have immediate needs, please call our main line at (847) 232-1991. 

Thank you,

The ISIS Power Team

Vortex GT EV Car wired with ISIS Power

Alternative fuels and electrical vehicles are growing in their popularity.  Marry that with the time-tested kit car, and you get something very unique.  You get the ability to personalize the car the way that you want it plus you get the benefits of a pure electric power train. 

When it comes to wiring kit or component cars, your have some options but none better than our ISIS Intelligent Multiplex System.  Our system is flexible, easy to install and gets you the features that you want to customize the car the way you want it.  Here's a great example. 

Russ S is one of our customers in the UK.  He built a Vortex GT EV.  This is a component car, from Vortex Automotive LTD.  You can learn more about them from their website by clicking this link.  Their Vortex GT EV is a beautifully styled car. 

When it came time to wire the car, Russ wanted flexibility and the ability to configure the electrical system.  He was also concerned with weight.  He came to the team at ISIS Power and picked up a 3-Cell Kit with inMOTION. 

His finished car was recently featured in the July 2013 issue of Complete Kit Car, published out of the UK.  This is a great article that covers all of the technical details of the car with a ton of great pictures.  You can see the article below.  Watch for the on-line version over the next few weeks at www.completekitcar.co.uk. 

If you'd like to learn more about how our ISIS Power products can help you simplify the wire harnesses in your car, truck or bus, give our team a call at +1 (847) 232-1991 or email sales@isispower.com. 

Nick's 33 Hot Rod Blog

We're suckers for well detailed and planned projects.  Here's a great example.  Nick S is a new ISIS Power customer.  He just ordered a 3-Cell Kit with inLINK and inMOTION for his Factory Five Hot Rod project.  He wanted something a little more functional and advanced than the traditional wiring harness that comes with this kit. 

Nick has a great blog that follows each step of his project.  It covers each and every step of this build with great pictures and commentary.  If you're building this car, this is a great resource.  Additionally, he will be detailing the wiring and harnessing of this car using our ISIS Intelligent Multiplex System.  Check it out by clicking here.  All of our details will be in the Plumbing and Wiring section. 

If you want to learn more about how our ISIS Power products can help you clean up the wiring in your car plus give you late-model functionality, give our guys at call at (847) 232-1991 or email us at sales@isispower.com. 

Repeat ISIS Customer

We get a lot of repeat customers.  Once a guy wires his car with our ISIS Power system, he never goes back to a traditional wiring harness.  Joe M. is a great example.  You have seen his handiwork before.  We had his Ferrari P4 in our booth at the 2010 SEMA show.  That was a spectacular example of simplicity and elegance in the wiring. 

Joe approached us in mid-2012, ready to wire another.  He was doing a complete restoration to a 1967 Camaro and he wanted to wire it again using our ISIS Intelligent Multiplex System.  This car is a little more involved than the Ferrari.  He wanted our inTOUCH MAX touch screen in the dash.  He wanted to control everything from the screen including his lights, the ignition, the starter, his windows and his heat & A/C.  This car is wired with our 3-Cell Kit.  He added inMOTION for his windows and locks plus inVIRONMENT to control his Vintage Air Gen-IV.  Lastly, they wired their gauge cluster using our inDASH harness.  Helped by Mark Mc, the finished product is pretty spectacular. 

This Camaro was born as a Bolero Red, 6-Cylinder car with a 3-speed manual transmission. It was built in March 1967 in Van Nuys, California. At some point in its life, it was converted to a 350 C.I. V-8 paired with a 700R4 automatic transmission; likely done sometime in the 80’s. A previous owner had painted it white with a backyard-quality paint job during which no one bothered to remove the trim, windows, or bumpers. When Joe bought it, it was completely disassembled and stripped of its paint. All the parts acquired with it were stuffed into the body shell. Thankfully most of the sheet metal was solid and required little rust repair, but it had been hit in the rear necessitating the replacement of a quarter panel, rear taillight panel, and the rear valance panel. The hood was also replaced with a Goodmark cowl hood.

 

Here are some more details on the build:

 

• Lexus Ultrasonic Blue Mica Paint sprayed by Lee Webb
• Corbeau Sport front seats
• Custom-sewn cover for rear bench seat to match fronts
• GM 5.7L LS1 Engine (dyno’d at 430 flywheel horsepower)
• Tremec TR-6060 6-speed transmission
• C5 Corvette front control arms, sway bars and front brakes
• Detroit Speed & Engineering steering rack
• Strange Engineering single-adjustable coilover shocks, front and rear
• Art Morrison Parallel 4-Bar rear suspension w/adjustable panhard bar
• Shaved dash switches
• A/C Ducts frenched into steel dash
• Custom sheetmetal transmission tunnel
• Custom sheetmetal dash center section for Stereo/Nav and inTouch Max
• Smoothed firewall
• Custom TIG-welded stainless steel exhaust with Borla ProXS mufflers
• Vintage Air Gen IV HVAC controlled by ISIS inTouch Max
• Large Griffin aluminum radiator mounted behind stock core support with widened opening
• Shaved drop rails
• Shaved emblems
• CPP 7” Dual-diaphragm brake booster
• Build time: Approximately 2,000 hours

Here is a great shot of the dash.  You can see our inTOUCH MAX screen below the stereo.  The other thing that you will notice is that there are no other switches in the car.  Everything is controlled from our touch screen. 

 

 

The front POWERCELL is mounted in the front, left corner of the car.  This makes it very easy to see and very accessible.  These cells are sealed and rated for under hood temperature. 

 

The MASTERCELL is mounted right behind the shifter.  They fabricated a clever cover that conceals the MASTERCELL but still makes it accessible if necessary. 

With our inDASH harness, the wiring for the gauge cluster is clean and very neat. 

They mounted the rear POWERCELL and the inMOTION cell on a custom panel in the trunk. 

The overall car is great.  It performs, it looks awesome and the paint pops.  On top of that, the wiring is simple, clean and neat.  Congratulations to Joe and Mark on a tremendous build. 

Keep an eye on this car.  You will be seeing it again. 

If you want to learn more about how  you can wire your car with ISIS Power, give our team a call at (847) 232-1991 or email us at sales@isispower.com. 

 

Westfield Wired with ISIS Power

One of our customers just sent us these great pictures of the Westfield XTR2 that he just wired with our ISIS Power system.  This is a very impressive race car that is fully street legal in The Netherlands.  He wanted this car to be light and fast on the track.  At the same time he had to have all of the basic functions of headlights, brake lights, high-beams and turn signals.  Our ISIS Power system gave him all of these features. 

The car is powered with a Hayabusa engine, tuned to 230 hp, driven through a 6-speed constant mesh sequential gear box.  All in, it weighs about 900 pounds and can hit 0 to 60 times in about 2.7 seconds with a top speed of 165 mph. 

Our customer wired this car with our standard 3-Cell Kit and an extra POWERCELL.  His MASTERCELL is located behind the dash on the left side.  The front POWERCELL also under the dash on the right side while the other two POWERCELLs are located in the rear of the car.  One of the rear POWERCELLs is controlling his ECU, fuel pumps electronic shifter, water pump and starter.  The other rear POWERCELL is controlling the rear lights. 

The finished package for our customer is a simple, clean and light-weight wiring harness that he could easily customize to his unique application.  Here are some pictures of his install. 

Thanks to Harry B. for sharing these pictures with us.  Congratulations on an amazing car.  Our entire team at ISIS Power is proud to be a part of your project.

If you want to learn more about how you can wire your race car, track car, hot rod or commercial vehicle with ISIS Power, give our team a call at (847) 232-1991 or email us at sales@isispower.com. 

GTM 370 Comes Alive

Congratulations to Doug M. for starting his Factory Five GTM for the first time with our ISIS Intelligent Multiplex System. 

Doug is wiring his GTM using our 3-Cell Kit, inMOTION, inDASH MAX, inVIRONMENT, inRESERVE and our inTOUCH MAX screen.  He has complete control of all of the car functions, including his heat and A/C, through the touch screen in his dash. 

He has a great blog that details every aspect of building his car, including a lot of details on installing our ISIS Power products.  You can see his blog here.     Here are some highlights from his blog. 

Here you can see where he has mounted his Mega fuse holders and his inRESERVE solenoid. 

Here you can see how he mounted his MASTERCELL. He is using the mounting plates designed by Shace Vacek at VRaptor. 

Here is his front POWERCELL

And his rear POWERCELL.

 

Here is the custom bezel he made to hold his inTOUCH MAX screen on the dash. Very well done.

 

 

Here's a quick video of one of the first starts of his GTM using our ISIS Intelligent Multiplex System. 

 

And one more video showing off his screen and bezel in a little more detail.



Congratulations to Doug on hitting this big milestone in his build. 

If you want to learn more about our ISIS Intelligent Multiplex System and how it can help you get the most out of your car, check out our website at www.isispower.com.  You can also call our tech team at (847) 232-1991 or email us at sales@isispower.com. 

Behold the TEC9 Camaro

 

We get to see a lot of unique cars. Our ISIS Power system has been used to wire everything including armored vehicles, hot rods, utility trucks, resto-mods, buses, race cars and limousines. The TEC9, built by Mitch Henderson Designs is a great example of what ISIS can do for your vehicle.

We first hooked up with Rob Wechsler and Mitch Henderson a while ago. They had a great vision and a plan for this car. They wanted a one-of-a-kind Camaro that stood out, looked good and could perform. No trailer queen here. At the same time, the car had to be functional and do all the things that a new car does. This meant it had to have all the modern conveniences of heat & A/C, lighting control, iPad interfaces and a great stereo system. Our ISIS Intelligent Multiplex System gave them the ability to wire the TEC9 easily plus add all of these features.

They debuted the car at the 2012 SEMA Show in the Jet-Performance booth. Here's a great video that Kevin Oeste from V8TV shot highlighting the car.

In the car, they're using a Keisler Transmissions T56 Magnum, Don Hardy Race Engines LS7, RideTech Double Adjustable Shockwaves & E3 Controller, Dynatech Driveshaft, One off Bonspeed Wheels, Pirelli Tires, Kicker Sound, Dupont Paint, Vintage Air Serpentine System, Flaming River Custom Steering Rack, Willwood brakes, Precision-Metalcraft Intake, a custom tune by Taylor Simms of Dallas Performance, and Pfadt Suspension Components. 

The car was designed by Mitch Henderson, he worked with Dupont and created an awesome color combination, and then hit up Brad Fanshaw with Bonspeed Wheels to create these one-off wheels. The fabricators at Mitch Henderson Designs then took his rendering and brought it to life with a complete custom chassis, narrowed and channeled to accept the 19-20 tire combination and plant the 720hp LS to the ground.

To control all of the electrical stuff in the car, they wired it with our ISIS Intelligent Multiplex System. They have a 3-Cell Kit with inMOITON, inTOUCH Mobile and an extra POWERCELL. They mounted an iPad in the dash to control all of the systems in the car, including the Vintage Air for heat and A/C.  

Rob did a great job of wiring and looming all of the harnesses in the car. Here's a shot of the mount that he made for the inMOTION Cell and one of the POWERCELLs plus the Mega fuse holders.

Here's a shot of the MASTERCELL, inMOTION Cell and one of the POWERCELLs mounted behind the dash.

The guys had the car at the Good-Guys event in Nashville a few weeks ago and walked away with a Bobby Alloway Builder's Choice Award. In addition to looking great, they showed that the car could perform on the track.

A great job to Rob, Mitch and their entire team. Click here to get more information on Mitch Henderson Designs. 

Mitch Henderson Designs
929 J-Place, Suite 500
Plano, TX 75074
214.585.1692


If you want to learn more about how to wire your car with ISIS Power, give our team a call at (847) 232-1991 or email us at sales@isispower.com.

 

Happy Memorial Day from ISIS Power

The team at ISIS Power wish you all a safe and happy Memorial Day weekend.  We heartily thank all of our service men and women for their dedication to our freedom and we remember those who have given their lives to keep our liberties safe. 

Our office will be closed on May 27th to celebrate Memorial Day.  We'll be back in force on Tuesday the 28th.